medical waste incineration treatment technical (mechanical solution technical) for the treatment of infectious waste caused by hospital outpatients, disease prevention companies, patient care centers, medical research institutes, etc.:
 
1) Clinical outpatients in hospital outpatients;
 
2) Waste caused by blood analysis in hospital outpatients;
 
3) Wastes with coliform and pathogenic cell culture fluids and bacteria-preserving fluids caused by clinical medicine, classroom teaching, scientific research and other medical thematic activities;
 
4) All waste caused by infectious diseases;
 
5) Waste sharp objects caused by hospital outpatients, including waste needle tubes, waste intradermal needles, waste scalpels, waste scalpels, waste infusion sets, waste surgical treatment saws, glass slag, etc.;
 
6) sludge caused by sewage from hospital outpatients;
 
7) Expendable pharmaceutical and organic chemical waste.
 
 
420kg / h medical waste incineration treatment system software to solve the scale of operation: design concept of mud production 420kg / h, 24 hours of continuous operation; with light diesel as an auxiliary material, the bottom position of heat 10000kCal / kg.
 
The key incineration treatment equipment is machinery + second combustion chamber + exhaust gas to solve the machine equipment; to ensure the re-use of waste heat recovery, according to the boiling water heat exchanger, can show the application of boiling water customers or the application of the circulation system; the exhaust gas through the sprayer desulfurization tower, activated carbon suction High-efficiency bag filter is clean; the temperature of a combustion chamber is 850~900 °C, and the second combustion chamber is 1000~1200 °C; the time of high temperature soot staying in the furnace is indeed equivalent to 2.0S; the ignition efficiency is more than 99.9% The removal rate of incineration treatment is greater than 99.99%; the thermal decay rate of incineration treatment sediment is less than 5%; the aspect ratio of incinerator exhaust cylinder is greater than 35 meters.
 
The incineration treatment system software and its machinery and equipment are manufactured and installed and exceed the relevant national industry standards.
 
 
1 process planning plan is clear
 
As an environmental protection, environmental protection and energy-saving quality project, this processing technology uses excellent, effective, mature, and reliable engineering design, with more obvious environmental protection economic benefits, economic benefits and social and economic benefits.
 
1.1 Motor selection of incinerator
 
2. Machinery is the type of furnace used in the theme activity hearth. The furnace is technically mature and easy to use. It is commonly used for incineration of various types of liquid, semi-liquid and liquid waste, especially in the application of incineration. It has high water content and is difficult to solve industrial production waste and hazardous waste. It is used by countries all over the world due to its large amount of mud production, small footprint, high elimination rate of hazardous components and easy operation of long-term equipment. In order to cooperate with the mechanical incineration, an additional two-chamber equipment is required.
 
3. Mechanical solutions for medical waste have the following characteristics:
 
 
1) Strong adaptability, can solve together a variety of multi-component raw materials and their different calorific raw materials;
 
2) The mechanical equipment is not easy to see, it is not easy to destroy, and the maintenance is convenient;
 
3) It is very easy to adjust the rotation speed of the kiln, which is conducive to manipulating the waiting time of the waste in the furnace;
 
4) The material has high ductility and can accept single-phase electric waste and solid-liquid mixed-phase waste in solid, liquid and gas three-phase electricity;
 
5) The initial project investment and operating cost of the mechanical solution to the waste system software are low;
 
6) It can maintain continuous automatic diligence and slag discharge, and rotate the raw materials during the whole process of turning, so that the raw materials are evenly distributed and well-balanced;
 
7) The burning rate is large, it is easy to maintain the automatic control system, and the actual operation staff is labor efficient;
 
8) The liquid such as waste water in medical waste is not easily discharged in the kiln body. After being ignited at high temperature and gasified, it will be incinerated with the dust into the second combustion chamber.