Product introduction
 
In the whole process of industrial production, a lot of sewage is produced, most of which can be solved by basic biochemical or physical methods, but there is still a small amount of high-concentration sewage, and its COD reaches more than 100,000 or even millions. And with organic salt, the traditional sewage treatment method is not good enough to incinerate and treat high-concentration sewage. The characteristics are given:
 
(1) Selecting the tangential type to make the atomization equipment-internal hybrid two-fluid mechanical electronic cigarette atomizer, the mixing level, the actual effect of atomization, the ignition rate and high efficiency are extremely high, and the excess air coefficient is low, which can save a lot of money. The size of the atomizing nozzle is large, the viscosity of the fluid mechanics and the moisture content of the residue are not high, and it is not easy to block; the bottom pressure sprayer method is adopted, the safety of the high pressure spray gun is not easy to damage, the common fault is not easy, and the ignition is easy to use. , to make atomized substances can use bottom pressure steam or gas;
 
 
(2) The ignition safety factor is high. The operation logic program does not remove the inflammable and explosive gas before the fire in the furnace. It can not be used to prevent the gas explosion. Under the fire detector, if the furnace is produced, If the fire or fire is unsuccessful, it will be automatically disconnected, the supply and demand of sewage will be balanced, and the alarm system will be sound and reliable.
 
(3) According to the composition and characteristics of the sewage, design the incinerator body with different appearance and lining; design a different temperature control method according to the salt content in the sewage to ensure that the inorganic salt is not wall-mounted in the furnace during incineration Very little corrosion resistance is released; the dust and acid-alkali vapors generated during the whole process of incineration are effectively solved by **, and sufficient environmental pollution is not guaranteed after sewage incineration treatment;
 
(4) Considering the application of equipment temperature after sewage incineration treatment, it may cause steam, boiling water or warm air for manufacturing applications;
 
(5) The sewage incinerator can solve industrial waste gas and small amount of solid waste together in solving sewage.
 
 
Incineration treatment capacity
 
Suitable incineration treatment:
 
(1) Non-flammable high-concentration (BOD, COD) sewage, wastewater, citric acid, organic chemical base, etc.;
 
(2) Flammable wastewater, waste organic solvents, etc.;
 
(3) It can solve industrial waste gas, spray organic waste gas, malodorous organic waste gas, and the like together. ? Waste water production: 50 ~ 5000kg / h
 
Simple process description
 
The key of the incineration treatment system software is: furnace itself + GL heat exchanger + self-washing washing tower + connecting exhaust flue + exhaust fan + chimney + burning combustion system software + compressed air system + spray gun to do atomization system software + Oxygen supply system software + instrument control system constitutes a complete set of incineration processing technology; all system software air pressure operation design concept, equipped with negative pressure sensor PID automatic adjustment of the operation of exhaust fan speed ratio, to ensure that the system air pressure remains at all In the normal working category (-30-50pa), and under the hood, the common faults of the exhaust fan are maintained; the incineration treatment combustion system software can use diesel engine, gas or waste organic solvent as auxiliary material.
 
In the high-temperature area, the brown fused alumina heat-resistant and wear-resistant refractory castables are used. These materials have good thermal vibration reliability, strong corrosion resistance, small line transformation, long service life and long-term application temperature of 1600 °C. In the high-temperature soot area, 1300°C high-aluminum heat-resistant and wear-resistant refractory castables are used. The fireproof material is lined with insulation material, lightweight concrete insulation board, high temperature resistant and wear resistant insulation layer. The anchor is 0Cr25Ni20.
 
Ignite according to the three T+1 standard (temperature, time, vortex + gas multiplication index) in the furnace body by high temperature thermal cracking ignition, ignition temperature control in the middle of 850 ° C -1000 ° C, soot stay time of 2s , harmful organic substances in waste organic solvents, sewage and wastewater are dissolved and destroyed. The waste water, waste organic solvent and sewage spray gun are made of SUS316L material vapor-liquid mixed electronic cigarette atomizer. The electronic atomizer adopts excellent fluid mechanics design concept. The interior of the spray gun has different water retaining plate design concept, making the sprayer particles uniform. exquisite.
 
The air compression air supply is low, which saves the operation cost for the customer. The nozzle of the nozzle is large, and the internal design is uniquely designed to avoid the blocking condition reasonably. The water spray and air supply of the spray gun are small, and the water spray is saved by one-third of the hour than the fourth-generation spray gun.
 
The high-temperature soot caused by the incineration treatment is lowered to 600 °C by the temperature of the G-L heat exchanger, and then desuperheated to 160 °C according to the speed of the self-propelled washing tower, and is turned into a region. The acid-alkaline zone caused by incineration treatment is digested and absorbed by the demisting equipment after being combined in the washing tower. ** The qualified dry soot is discharged into the air through the exhaust fan.