Product introduction
 
The rotary incineration treatment kiln is an incineration processing equipment used in the international industrial production waste treatment industry. The market share of the industrial production waste incineration treatment industry is 85%, which is in the Ministry of Science and Technology of China and the General Administration of Environmental Protection. The announced ** industrial production waste treatment technology in the current policy of strong incinerator furnace type, can solve liquid and liquid waste together.
 
 
The solid waste is sent to the machine by special-purpose conveying machinery and equipment. The liquid waste is sprayed into the furnace according to high efficiency, and the waste is dissolved in the machine to carry out the whole process of water volatilization, volatile dissolution, ignition and ignition. The desulfurization gypsum component is discharged from the bottom end of the second combustion chamber, and the soot generated enters the second combustion chamber, and is mixed with the re-ignition gas in the second combustion room, and is ignited beyond the smoke to keep the exhaust gas safe and environmentally friendly. The characteristics of the mechanical incinerator are wide adaptability to waste, simple operation and maintenance, and long service life.
 
Rotating the hazardous waste kiln solution system software is basically the traditional incinerator in the traditional mechanical incinerator, and the excellent incineration processing equipment independently developed by the company has achieved excellent results in strengthening heat transfer and ignition. The system software is equipped with special-type enhanced thermal equipment, which is free from the defects that the traditional mechanical gas and waste are not enough to cause heat transfer and ignition of the waste. The system software also has the function of avoiding slagging in the furnace. The function of the system software is to provide enhanced combustion equipment under the second combustion chamber, to fully ignite the desulfurization gypsum entering the second combustion chamber, and to improve the thermal efficiency of the system software, together with water cooling and crushing slag machine fully automatic slag discharge The comprehensive role.
 
 
The characteristics of this incinerator are summarized as follows:
 
(1) The machine and equipment can be incinerated together to treat solid waste, liquid, colloidal solution and vapor, and have strong adaptability to incineration treatment;
 
(2) Incineration treatment of raw materials tumbling forward, several heat transfer methods coexist in one furnace, and the heat utilization rate is high;
 
(3) The high-temperature raw materials touch the refractory insulation materials, and the furnace lining is convenient to be removed, and the cost is low;
 
(4) The principle of the transmission system is simple, the transmission system is organized in the kiln casing, and the equipment maintenance is simple;
 
(5) The requirements for incineration treatment and water content are not high;
 
(6) The waiting time of nearly 1 hour in the machine and the high temperature of 700 °C make the hazardous waste base burn; the obvious vapor mixture of the second combustion chamber causes the unburned matter in the soot to ignite more than the high temperature required for the dissolution of the hazardous components (1100 °C) The waiting time of the dust in the high temperature zone is 2 seconds; not only the waste is burnt out, but also the source area causing the ** is bypassed or reduced from the root;
 
 
(7) Excellent sealing measures and air pressure in the furnace to ensure that harmful substances are not leaked;
 
(8) The operating rate of machinery and equipment is high, and the annual operating rate is usually 90%; the actual operation and maintenance are convenient;
 
(9) Adding heat transfer and avoiding slagging equipment in the machine, and expanding the incineration treatment to increase the efficiency of the incinerator;
 
(10) Convergence** technically, the traditional two-combustion chamber is evolved into a two-burning furnace, which improves the burning rate of desulfurized gypsum, improves the high efficiency of mechanical incineration treatment, and has the slag discharge, slag crushing and denseness at room temperature. Locking the wind and other comprehensive effects.
 
 
  Advantage
 
The machine has the advantages of long waiting time, good heat insulation, etc., and the rolling layer has sufficient rolling due to the rotating effect. The mechanical incinerator has a strong adaptability to the incineration of the incineration treatment, which drives the mechanical incinerator to become the ideal incineration treatment system software for all waste.
 
Scope of application
 
Rotary incinerators can be used in a variety of applications: hospital outpatient, pharmaceutical, product development management centers; government departments, municipal engineering.